TempTag loggers measure temperature. Designed to meet Centers for Disease Control and Prevention (CDC) guidelines, this logger is ideal for clinical applications, such as vaccines storage and other Healthcare monitoring solutions. This Bluetooth® Low Energy-enabled logger is designed for wireless communication with a mobile device. It transmits over 900 MHz frequency to Plumsense Server. Using the Mobile app, you can easily configure the device with one or two different external Sensors. You can also quickly perform daily device checks, download reports, and monitor alarms. Use the built-in LCD screen on the device to check the current temperature, maximum or minimum readings, alarms, battery use, and more.

Specification
Radio Frequency Radio 1: 900MHz                              Radio 2: Bluetooth
Transmission Range 900MHz: 2500 ft (762 m) (open field range)
Bluetooth 4.1: 100 ft (30.5 m) (open field range)
Radio Power for Bluetooth 5.0 1mW (0 dBm)
Model-1 (FX100): Lab/Cryogenic RTD Temperature Probe

  • Temperature Range: -328°F to 311°F (-200°C to 155°C)
  • Accuracy: ±1.3°F(0.7°C) at -94°F to -112°F (-70°C to -80°C)
  • NIST Calibration: Traceability available
  • Cable Length: 10’ (3 m)

Standard Temperature Probe

  • Temperature Range: -60°F to 180°F (-51°C to 82°C)
  • Accuracy: ±0.4°F (0.2°C) from 14°F to 158°F (-10°C to 70°C), ±0.4°F(0.5°C) from -40°F to 14°F (-40°C to -10°C) and over 158°F (70°C)

Cable Length: 6 ft
Model-2 (FX200): Requires A100 Temp/Humidity Sensor
Temperature Range: -40°F (-40°C) to 257°F (125°C)
Accuracy:  ±0.2°F (±0.1°C)
Humidity Range: 0-100%RH
Accuracy: ±1.5%RH
Model-3 (FX300): Current: 4 to 20mA
Voltage: 0 to 10V
CO2 / Air Velocity/ Low Pressure Differential / Voltage/ mA Level on Display (Configuration via Mobile App)
Logger Operating Range -10° to 50°C (14° to 122°F), 0 to 95%RH (non-condensing)
Logging Rate 1, 5, 10, 15 or 20 Minute
Time Accuracy ±1 minute per month at 25°C (77°F)
Battery Type Two AA 1.5 V Lithium Batteries (Model L91 Energizer), user replaceable
Optional External Power supply via USB C
Battery Life 2 years, typical with logging interval of 5 minutes
Memory 1 MB (32,000 measurements both channels, maximum)
Full Memory Download Time Approximately 15 Minutes; may take longer the farther the device is from the logger
Display 2.7’’ MIP Display
Dimensions 8.8 x 14.6 x 2.5 cm (3.46 x 5.74 x 0.98 inches)
Weight 242 g (8.53 oz)
Environmental Rating IP67